Posts

Bike Safety Check

Get in the habit of completing this bike safety check

Failure to safety-check or maintain your bike can lead to accidents. Easily avoid some of these pitfalls with a simple bike safety check. Here are some refreshers on what to check and how often you should check your bike to ensure it’s safe for the road, after all, public health in cities is becoming more serious when it comes to pedestrians and cyclists within cities. Implement these safety checks before your next Rookie Triathlon training ride.

Things to check before every ride

  1. Tire pressure and road debris – keep pressure right at or near 5 to 10 lbs. below the recommended pressure. This will help prevent flats and by default extend the lifetime of your rim. Check for small thorns, staples, cuts, bald spots, or other problems with the outside of the tire.
  2. Bolts on the bike – make sure that the bolts on the stem, saddle, and seat post are nice and snug. Some bolts have a recommended torque due to the differences in the strength of the materials being used. If so, make sure bolts are tightened correctly. Most, if not all, bike stores carry torque wrenches.
  3. Tighten skewers – make sure both the front and rear skewers of the wheel are properly tightened and facing in the proper direction “back or up.”

Things to check every month

  1. Crank bolts – make sure that each crank bolt is nice and snug. These may work themselves out over time. An impact to the side of the bike is a common culprit to a loose crank.
  2. Headset – make sure that the headset is snug. A loose headset will lead to speed wobbles or a squirrelly bike.
  3. Trueness of wheels – make sure that your wheels are passing evenly through your brake calipers and frame. An untrue wheel could lead to broken spokes or uneven wear on your tires. If your tire is no longer true, follow this advice to true your wheel at home.
  4. General shifting of the bike – make sure that your chain is not dumping to the inside or out on the front set of rings. Make sure the rear derailleur is moving smoothly across your cassette and not rubbing on your rear wheel or frame. If this is occurring chances are your rear derailleur hanger has been slightly bent.
  5. Pedals – make sure both pedals are nice and snug. Remember the left pedal is reverse threaded. Pro tip: read our blog for a deeper dive into removing or replacing pedals.

Things to check every 2 to 3 months

  1. Inspection for cracks – clean the frame off with a damp rag or wash your bike. Inspect the entire frame, fork, seat post, and wheels for cracks, delaminating, or loosening of welds. If you find that any of these areas have been compromised in any way, “Do Not Ride The Bike.” Take it to your LBS “local bike shop” for inspection or have James Balentine with City Limit Cycles come to you. One more ride is not worth serious injury.

Note: Riders that race bikes, travel with their bikes, or know that they are tough on their equipment should run through this checklist before every ride.

Bike Spring Cleaning

Taking time to wash your bike is just as important as checking all parts

Spring cleaning doesn’t just pertain to household duties. So brush the cobwebs off your bike, wash your bike, and get it in proper gear for the spring triathlon season. Ensure your bike is ready to go, especially if you’re racing Rookie Tri on Sunday, May 6th!

Whether your bike is aluminum, steel, titanium, or composite, an important aspect of any frame is keeping it clean. Steel rusts, aluminum corrodes, titanium and composite bikes just look cruddy.

The paint on a steel or aluminum frame is porous and penetrated easily by elements that will rust the tubes from underneath the paint. Grease and solvents can degrade the glued joints of some older composite bikes with aluminum lugs.

Check inside your frame for water. It’s more common than you think for water to seep in down between seat posts and seat tubes. Especially if you ride in the rain or carry your bike on top of the car in the rain. Water in a steel frame shortens its life significantly.

Remember that a clean, dry bike is a happy bike!

Stop by your local bike shop if you need help cleaning your bike or learning about your bike’s frame.